How To Reset The Oil Light On A Jeep Compass

Start here

What to Know

Without pressing the brake pedal, push the ENGINE START/STOP button to place the ignition in the "On/Run" position without actually starting the vehicle.

Key Highlights

Before beginning any part of this oil light reset procedure, first make sure the engine is completely turned off.
Now, you will press the accelerator pedal down to the floor very slowly and completely release it.
After completing the three accelerator pedal presses, you can now cycle the ignition to the "Off" position.
You will now want to start your 2024 Jeep Compass completely to verify that the oil-change indicator has successfully been reset.

A warning light on the dashboard of your vehicle can often feel quite unsettling and confusing, but many times it represents a very simple fix. Regular oil changes remain an important part of vehicle ownership, helping to keep your engine running smoothly for a very long time. This guide will show you how to use the 2024 owner’s manual to reset a Jeep Compass oil light using a straightforward process that anyone can easily perform at home. Reset the indicator only after the scheduled maintenance has been performed. Here are the steps to follow.

Place the Ignition in the “On/Run” Position

Before beginning any part of this oil light reset procedure, first make sure the engine is completely turned off. Without pressing the brake pedal, push the ENGINE START/STOP button to place the ignition in the "On/Run" position without actually starting the vehicle. This step activates the electrical systems and powers the dashboard lights, preparing the vehicle for the reset process. Do not turn the engine over or start the vehicle.

Press the Gas Pedal Three Times

Now, you will press the accelerator pedal down to the floor very slowly and completely release it. You must repeat this process two more times within ten seconds for a total of three full presses and releases of the gas pedal. This three-press action serves as the command to clear the oil light and reset the system. You will want to make sure you press the pedal all the way down each time.

Turn Off the Ignition Completely

After completing the three accelerator pedal presses, you can now cycle the ignition to the "Off" position. This final step effectively saves the reset command and completely shuts down the vehicle’s electrical systems. The process does not require any additional steps or adjustments to any other settings. The system now prepares for the next phase, which involves checking your work.

Start the Jeep Compass to Check the Light

You will now want to start your 2024 Jeep Compass completely to verify that the oil-change indicator has successfully been reset. You should find that the oil light no longer appears on the dashboard display after the engine starts. The absence of the oil light indicates a successful reset. If you do not see the light, then you can continue driving your vehicle with confidence.

Reset the Oil Light if Necessary

If the oil light remains on after completing the previous steps, then you must repeat the entire procedure. Make sure you fully press the accelerator pedal down slowly three times within ten seconds before cycling the ignition to the "Off" position. You must then restart the car to check if the light remains on the dashboard. This process should resolve the issue for most people.